Ω-Ball Valve
The Ω-Ball keeps everything the C-Ball got right — cavity-free, torque-seated metal-to-metal sealing and top-entry in-line maintenance — and adds a proprietary design engineered for lower operating torque and longer seat life than a conventional C-ball.
Engineered for the duties that wear valves out.
The Ω-Ball's internal design is proprietary. Here is what it is engineered to deliver in service.
Lower operating torque
A proprietary Ω-Ball design, engineered for lower operating torque than a conventional C-ball.
Longer seat life
Engineered for longer seat life than a conventional C-ball in abrasive, fouling and high-cycle service.
Repeatable tight shut-off
Metal-to-metal, torque-seated sealing designed to stay repeatable across the service life.
Cavity-free design
No trapped volume between ball and body.
Hard-coated trim
Wear-resistant, hard-coated sealing surfaces, selected for the medium and temperature.
In-line maintenance
Top-entry design: internals are serviceable in-line, without removing the valve from the pipe.
Everything the C-Ball got right — and the parts that wear, re-engineered.
Retained: cavity-free, torque-seated metal sealing, in-line renewable. Upgraded: a proprietary design engineered for lower operating torque and longer seat life.
| Feature | Conventional C-ball | ANMAI Ω-Ball |
|---|---|---|
| Operating torque | Standard | Engineered for lower operating torque |
| Seat life | Standard | Engineered for longer seat life |
| Sealing repeatability | Good | Designed to stay repeatable across the service life |
| Cavity-free | Yes | Yes |
| Torque-seated metal sealing | Yes | Yes |
| In-line seat renewal | Yes | Yes — top-entry |
Highlighted rows are the Ω-Ball design targets versus a conventional C-ball.
Main characteristics
| Body design | Top-entry — in-line access |
|---|---|
| Ball & trim | Proprietary Ω-Ball design, hard-coated |
| Operation | Quarter-turn (90°) |
| Sealing | Metal-to-metal, torque-seated, cavity-free |
| Seat | Renewable in-line |
| Stem sealing | Multi-level stem seal, low-emission design |
| Mounting | ISO 5211 actuator pad |
| Pressure rating | ASME Class 150 – 2500 |
| Temperature | −196 °C to +650 °C, depending on materials and trim |
| End connections | ASME flanged, butt-weld, compact flange, hub ends |
| Design standards | Designed to API 6D / ASME B16.34 / ISO 17292 |
Indicative envelope — confirm against the datasheet for your service.
Materials
Body and trim selected for the service.
Design standards
Designed to API 6D / ASME B16.34 / ISO 17292.
Actuation-ready
ISO 5211 actuator pad — supplied bare-shaft or as a matched, tested package.
Actuation & accessoriesBuilt for the duties that destroy ordinary valves.
- Emergency shutdown (ESDV)
- HIPPS
- On/off isolation
- Control valve
- Cycling valve
- High-pressure isolation
- Slurry & powder
- Corrosive media
- Abrasive / erosive
- High-velocity flow
- Volatile / reactive
- Cryogenic fluids
- Coal gas / syngas
- PTA / polyester plants
- LNG — liquefaction & terminals
- Oil & gas — upstream / midstream
- Petrochemical & refining
- Power generation & mining
Specify the Ω-Ball for your toughest service.
Send the medium, temperature, pressure class and size — our application engineers will configure the Ω-Ball and return a documented proposal.
Request a Quote